BLTCJ - INDUSTRIAL ENAMEL, 139-2 BLACK
- MSDS: BLTCJ
- Manufacturer: CORONADO PAINT CO
- Product Name: INDUSTRIAL ENAMEL, 139-2 BLACK
- National Stock Number: 8010-00N017726
Product Identification
Product ID:INDUSTRIAL ENAMEL, 139-2 BLACK
MSDS Date:12/16/1987
FSC:8010
NIIN:00N017726
MSDS Number: BLTCJ
Responsible Party
EDGEWATER, FL 32032-1812
US
Emergency Phone: 904-428-6461
Info Phone: 904-428-6461 / FAX 904-427-7130
Cage: 33200
Contractor
Telephone: 904-428-6461
Cage: 33200
Ingredients
PIGMENTS
Fraction By Weight: 6.88%
VEHICLE
Fraction By Weight: 37.48%
AROMATIC HYDROCARBONS
Fraction By Weight: 55.69%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DRYING OF SKIN, EYE IRRITATION.
EXCESSIVE INHALATION MAY CAUSE ANESTHESIA, HEADACHE, DIZZINESS,
NAUSEA, UPPER RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION IF
NECESSARY, CALL PHYS. SKIN: WASH WITH MILD SOAP AND WATER, APPLY A
MILD SKIN CREAM, IN SEVERE CASES CALL PHYS. EYE: FLUSH WITH WATER
FOR AT LEAST 15 MIN, CALL PHYS. INGEST: CALL PHYS.
Fire Fighting
Flash Point Method:SCC
Flash Point:45.0F,7.2C
Lower Limits:1.0%
Upper Limits:7.0%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:VAPORS MAY FORM EXPLOSIVE MIXTURES WITH
AIR.
Accidental Release
Spill Release Procedures:WASH WITH WATER INTO RETAINING AREA OR
CONTAINER. AVOID SPARKS, FIRE, OR HOT METAL SURFACES. SMALL
QUANTITIES MAY BE ABSORBED ONTO AN APPROPRIATE ABSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP COOL AND AWAY FROM SOURCES OF
IGNITION. USE WITH ADEQUATE VENTILATION. AVOID PROLONGED OR
REPEATED PERSONAL CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:ABOVE TLV USE NIOSH/MSHA APPROVED CARTRIDGE
RESPIRATOR OR GAS MASK.
Ventilation:LOCAL EXHAUST: USE WHATEVER IS SUFFICIENT TO KEEP WORKROOM
CONCENTRATION BELOW TLV.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON, BARRIER CREAM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:235F,113C
Vapor Pres:23@68F
Vapor Density:3.2
Spec Gravity:1.004
Evaporation Rate & Reference:1.9(N-BUTYL ACETATE=1)
Solubility in Water:NONE
Appearance and Odor:BLACK OPAQUE LIQUID; PUNGENT AROMATIC ODOR.
Percent Volatiles by Volume:62
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE AND DIOXIDE.
Disposal
Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
ACCORDING TO APPLICABLE LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.